Sam Engineering Construction is a partnership company and is incorporated on 1ST April, 2009. Prior to this, it was a proprietorship company since 1stApril, 1995. The business office is centrally located in Western Maharashtra at Kalamboli, Navi Mumbai, which is 45 km from Mumbai, 100 km from Pune and 30 km from Thane, Kalyan, Ambernath. Navi Mumbai is well connected by road, rail and air. The company is managed by well qualified & experienced professionals. The day-to-day operations of the establishment are looked after by managing partner Mr. Sam Daniel.

The company is engaged in various types of mechanical engineering activities including supply, fabrication, erection,testing &commissioning assistance for piping,equipments and structure etc. The piping comprises of all kinds of utility, process& power piping with MOC CS/LTCS,all kinds of SS,Alloys&Aluminium etc.The structural job comprises light&heavy section of steels for technological and factory shed etc.

The company is a member of group of companies comprising of

i. Sam Engineering Construction (SEC)
ii. Steeltech Engineering Company (STEC)
iii. Kairali Engineering Pvt. Ltd. (KEPL)
All the group of companies are having related Partners/ Directors. We supply fabricated equipment / structures etc. Also carry out erection & commissioning at site through individual company as per our and client’s directive and need. Thus our client can be provided all kind services of mechanical engineering under one roof.

Quality Policy

We, at Sam Engineering Construction shall carry out each and every work entrusted to us, as per the National / International standards, codes & practices (IS,ASME,AWS etc) specified by our client.

(SAM DANIEL) Managing Partner

Quality Objectives

To achieve the desired quality of the work done by us, the quality objectives are:-
I. To use ISI, ASME AWS etc. approved materials / Consumables.
II. To engage well qualified /trained staff and workmen who have gained adequate knowledge & practical experience to carry out the assigned work.
III. To ensure that the work is carried out as per the drawings, designs, codes & standards given by the clients.
IV. To carry out the work as per Good Engineering Practices.
V. To maintain work place as safe environment and clean.
VI. Necessary corrective changes for implementing the systems.

Elements of QA System

As described in the “Quality Objectives”, for achieving quality following Quality Systems are followed.
I. Organization Structure
II. Quality Control Resources
III. Quality Management Procedure and Documents.
IV. Periodical training imparted to QA/QC personal to upgrade their knowledge.

Organization Structure

QThe Quality Management Department is headed by CEO (Safety /Quality /HR), who is well qualified and experienced engineer. He works independently and reports directly to Managing Partner of the Organization.

The Quality Management Department consists of Quality Control and Quality Assurance sections which are managed by adequate number of qualified and experienced engineers/technicians who are deputed at individual site.

Quality Control Resources

I. Chemical Testing Laboratory (Outsourced)
II. Mechanical Properties Testing Laboratory (Outsourced)
III. X-ray, GAMA-ray & ultrasonic testing Laboratories (Outsourced)
IV. Weld Quality Testing (DP Test)- In house facility by qualified QC engineer.

Quality Management Procedure and Documents

Quality is our prime consideration while carrying out the mechanical engineering works to assure safety and efficacy. The defined quality criteria may differ from client to client but are similar in general requirements Viz.
I. Client focused Establishment:The Establishment depends on client’s requirement and therefore should understand current and future needs which are in line with clients’ requirements.
II. Leadership: Develop Leadership among the groups working at individual sites so that employees can be motivated and get fully involved for achieving the objective/goal.
III. Involvement of People: Using people’s knowledge, experience & given required training to achieve involvement of people in day-to-day working and system improvement.
IV. Time Study and Method Study Approach: Focus on the use of resources leading to effective utilization of manpower & machinery and materials.
V. System approach to Management: Align the works with the organization’s goals and targets, measure results against key objectives.
VI. Continual Improvement: Provide Resources, Facilities, Opportunities and Encouragement to people to contribute to the continual improvement of the work output and work quality.
VII. Timely Decision Making: Take corrective and preventive action by analysing the data and information to maximize productivity (per capita output) and minimize waste and rework.
VIII. Mutually Beneficial Client Relationship: Develop mutual trust, respect and commitment to client’s satisfaction and continual improvement.
IX. Periodical trainings are imparted by our in-house experts or outsourced expertise to up keep the knowledge of our all personal.

Sr. No.	Name of Key Personnel	Designation	Responsibility
1.	Mr. SamDaniel	Managing Partner	Overall Control and Management of Works at all sites and Techno – Commercial Decisions.
2	Mr. Karuna Shindhu Medda	Expatriate/Consultant	System/ procedure development, guidance,improvement,contracts&Execution control ,QA/QC, HR and Safety etc.
3.	Mr. Jinesh Joseph	CEO – Safety, Quality, HR	Contracts , Execution control,QA/QC, HR and Safety
4.	Mr. Thomas Varghese	COO	Execution of works and co-ordination between site and HO
5.	Mr. Shibin George	Head – QA	Quality Assurance of works at respective site
6.	Mr. Vincent.T.L	Head material Finance & Accounts.	Purchase, Finance & Accounts, Co-ordination between site and HO.
7.	Mr. Chandrashekar/ Mr.Sathyavir Kumar/Mr. MT Thomas/Mr.Suman Plus six	Site In Charge	Execution and Controlling work at site.

Sr. No.	Name and Capacityof Equipments /Machinery	Quantity
1	Poclain	2 Nos
B	JCB	4 Nos
C	Dumper	10 Nos
D	Tractor	3 Nos
E	Road Roller	1 Nos
F	Vibrator Needle	25 Nos
G	Prop Set	6000 Nos
H	Shuttering Material (Palte – 1.2 x 0.6)	8000 Nos
I	Plywood	6000 Sq Mtr
K	Pick & Carry F -15	8 Nos.
L	Trailer  40ft.	4 Nos.
	Plate Bending Machine up to 50mm	2 Nos.
LL	Farana Hydra-14mt	6Nos
N	Scaffolding Planks	5000Nos.
O	Scaffolding Pipe (6 Mtr)	15000 Nos
P	Scaffolding Pipe (3 Mtr)	8000 Nos
Q	Welding M/c – Rectifiers	300 Sets
R	MIG Welding Set	20Sets
S	Welding M/c Portable	50 Sets
T	Gas Cutting Set	60 Sets
U	Plasma Cutting M/c	6 Sets
V	Argon Welding Set	400 Sets
W	Drilling Machine up to 30 mm diameter	10 Nos
X	Drilling Machine up to 30 mm diameter with	15 Nos
Y	Pillar Drill 11/4” Capacity	5 Nos
Z	Hydraulic Pipe Bender 3” Capacity	10 Nos
1	PUG cutting Machines M/c	8 Nos
2	Die and Tap set up to 2” diameter	10 Nos
3	Hydraulic Jacks -10 Ton / 20 Ton with Pumpa	18 Nos
4	Screw Jacks up to 45 Tons	10 Nos
5	Jim Screws	13 Nos
6	Chain Pulley Blocks - 3Tons	20 Nos
7	Chain Pulley Blocks - 5Tons	20 Nos
8	Chain Pulley Blocks - 2Tons	40 Nos